NuStreams-900 provides various interfaces, such as 100/50/40/25/10/5/2.5G Ethernet, Gigabit Ethernet, 100/10Mbps Ethernet for different testing requirements. Also, all slots of NuStreams-900 support hot-swapping. Therefore, swapping or changing test modules can be done easily without powering off NuStreams-900.

There is anoptional module - CKM, it has GPS chip for clock synchronization between chassis and chassis, so NuStreams-900 can measure the latency between different places.

To provide a safe and reliable testing environment, NuStreams-900 has sensors embedded inside. Vital system information such as system temperature, rotation speed ofthe fans and system voltage can be picked up by these embedded sensors. This information can be read and interpreted by the web service running on management card, and the management card will alarm users when system failures occur. Furthermore, NuStreams-900 has new mechanism design, it’s more convenient to replace the cooling fan, soNuStreams-900 became easier to maintain.

With cards of different types installed, NuStreams-900 chassis can perform multiple, different tests simultaneously to ensurethe test precision. As the result, the time consumed for all DUTs’ multi-tasktesting will be shortened dramatically.

● Supports cascading (up to 3 chassis)

● Intuitive utility software for monitoring system temperature and the fan speed

● All slots support hot-swapping

● Performing synchronized tests between chassis

● Supporting multi-user mode, namely multiuser using the chassis and cards installed simultaneously

● Utility softwares provided by Xtramus Technologies which can analyze the test results and DUT performance with intuitive GUI interface.

● Cards supporting different Ethernet transferring rate, from 10M to 100G

● Simple and easy-to-understand system status LEDs

● Replaceable fan tray

● Utility softwares that complied with RFC-2544, RFC-2889 and RFC-3918.