• Xtramus NuStreams-2000i Chassis, Slot x 16

Xtramus NuStreams-2000i Chassis, Slot x 16

NuStream系統能針對各待測物進行二至七層及100%封包產生 ,送收及進行各項網路協定測試

NuStreams-2000i is an ideal test beds for lab design, troubleshooting and mass production test of network products, supporting 10G/1000M/100M/10M Ethernet. NuStreams-2000i provides various interfaces for different test requirements.

Up to 16 swappable test modules meet the complex test requirement and provide a flexible solution for mass production test in line. Comprehensive temperature and fan speed monitoring offer an intelligent environment control and ensure a realizable test.

The global command feature synchronizes traffic generation between test modules and could conduct cross-module latency test. Production test become more efficient and economic by reducing test duration significantly.

Software like NuWIN-RM, APMPT-4, and a series of  software which complies with RFC-2544, RFC-2889 enable the conformance test, performance analysis and stress possible.

● Comprehensive temperature & Fan speed monitoring with visual indicators

● Support hot swap of all test modules

● Synchronization auto calibration between test modules

● Support multi-user per test module for greater efficiency of hardware resource

● Multi-user application support

● Work with the XTRAMUS software applications for comprehensive functional testing, conformance testing and performance analysis all in one system

● Support 10/100/1000 Mbps (half / full duplex in 10/100 mode) Ethernet connections to a host PC, and can be set for auto-negotiation or speed is completely configurable

● Simple and Easy to read LED provides system status

● Replaceable fan tray

● Reduce test duration time, easily test RFC2544/2889 compliance, and create regression tests without programming

● Work with XM-RM Series Rapid Matrix Module for test of network DUT

● Wirespeed generation and receipt of layer 2 and 3 traffic

● Global Command on the chassis that can save lots of time to test the DUT

● High port density that test modules can be installed to 16 module slots

● Test chassis for Ethernet equipment with UTP cable, optical fiber or POF (plastic optical fiber) connections

● Rapid-Matrix module card that is installed on this chassis can generates multi-streams traffic simultaneously per port for the test that is similar to real network

Software Support



● NuApps-2544-RM

● NuApps-2889-RM

● NuCommander


● Power: Male IEC 320 receptacle

● Keyboard / Mouse: PS/2 6-pin DIN

● Monitor: HD-DB15 VGA port

● Ethernet: RJ-45 Gigabit port x 2

● Serial: RS-232 port x 2

● USB 2.0 port x 2


16 for test modules


29.5cm X 48.5cm X 19.6cm


● Operating: -10oC~ 50oC (14oF~ 122oF)
● Storage: -10oC~ 50oC (14oF~ 122oF)


● Operating: 0% ~ 85% RH
● Storage: 0% ~ 85% RH

Net Weight

Approx. 12.1kg

Power Source

AC 90V ~ 240V, 50Hz ~ 60Hz

Power Consumption

400 Watt


● LEDs shows the healthy status of running fan

● LED for each module shows the running status of installed module

● Independent power switch for the NuStreams-2000i chassis and the IPC module

● Digits LED display shows the current chassis ID

● Built-in sensor for detection of temperature and rotation speed of fans

版權所有 抄襲必究 copyright © 2022 翰特科技股份有限公司 All rights reserved.