• Xtramus NuPOE-16EL, PoE Testing Chassis, Slot x 16

Xtramus NuPOE-16EL, PoE Testing Chassis, Slot x 16

Though working with the PD emulation module, NuPOE-16EL can test the PoE performance of the DUT. In addition, it has a function of bypassing data, supporting fast Ethernet data transmission.

NuPOE-M16EL is a chassis especially designed for Power over Ethernet (PoE) tests. NuPOE-M16EL offers a prompt and flexible interface to test and monitor different Ethernet power sourcing equipment.

Usually, NuPOE-M16EL is used in combination with the PD simulation modules, which are inserted in the chassis. And up to16 modules can be supported at one time per chassis. For complete PoE testing solution, Xtramus provides XL-T451 module as the PD simulation module. With the XL-T451 module, NuPOE-M16EL realizes the functions of PoE tests, bypassingPoE tests and detecting the type of PSE.
● Specialized equipment for production testing of PSE switch device.

● Support cascade of multiple chassis.

● Support of Alternative A and /or B POE wiring mode.

● Support for all 5 PD classes (0~4) of power level.

● Emulate PD Connect, Disconnect, Overload, Short Circuit and Dynamic Loading tests.

● Great loading capacity for each port.

● Support up to 20, 35, 45 Watt for short-term overload tests.

● LCD on front panel displays chassis ID and temperature.

● IEEE802.3af and IEEE802.3at compliant.


Ethernet: RJ45 connector

Power: Male IEC 320 receptacle

Ethernet Speed

Support 10/100/1000 Mbps


IEEE 802.3-2005 Clause 33 (IEEE802.3af), IEEE802.3at

Test Mode

● Dynamic Loading test

● PoE Connect test

● PoE Disconnect test

● PoE Overload test

● PoE Short Circuit test


441 mm x 310 mm x 88 mm



0°C~ 40°C (32°F~ 104°F)


0°C~ 50°C (32°F~ 122°F)


Operating: 0% ~ 85% RH(non-condensing)

Power Source

AC 100 to 240 V, 47 to 63 Hz


版權所有 抄襲必究 copyright © 2022 翰特科技股份有限公司 All rights reserved.